Perkins Pr25A Busy Boy Tone With Meter Repaired
Available*
Item # 24640000
Model # PR25A
$472.50
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TONES
Test Equipment
Tone Generators- Probes-Amplifiers
Tone Generators- Buzzers
PERKINS ELECTRONICS
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Perkins Pr25A Busy Boy Tone W/Meter Repaired
Features
Three Tone Levels Ohmmeter And Capacitance Check Visual Monitoring 577.5 Or 500 Hz Interrupted Tone Balance Testing Automatic Non-Interfering Tone Simplexing Adjustable Interruption Rate Description
The Model Pr25A Conductor Tagger And Analyzer Is A Multi-Function Test Set That Enables Fast, Accurate Tagging Of Working And Non-Working Lines, While Eliminating The Risk Of Disturbance To The Customer. A Patented Subscriber Sentinel Is Used To Guard Against Interruptions Or Delays Of Customer Calls. Talk Battery And Alerting Features Are Provided To Obtain And Maintain A Communications Link Between Points Along A Cable.
Automatic Operation In The Automatic Mode, The Pr25A Prevents Tones From Being Introduced To A Working Line. If The Tone Is Already Induced In A Pair While Tagging, And The Party On The Line Lifts The Receiver, The Pr25A Stops The Tone Before The Party Can Hear It, If The Tone Is Already Induced On A Pair, And The Party On The Line Is Called, The Unit Reacts To The Central Office Ringing Generator And Immediately Stops The Tone.
Visual Monitoring Cable Pairs Can Be Monitored At All Times During The Pair Identification Procedure. A Monitoring Position Is Used For Visual Monitoring Without Sending Tone. A Craftsman Can Visually Check The Pair Status From The Meter On Section Throws Or Cutovers Where Pairs Have Been Previously Identified And It'S Only Necessary To Determine Whether A Line Is In Use Prior To Cutting Or Swinging.
Three Tone Levels Three Tone Levels (Low, Medium, High) Allows The Craftsman To Tailor The Tone Output To His Specific Requirement. For Example, Normal Tagging Should Be Performed With The Pr25A Sending In The "Med" Tone Level Position. In Short Cables, Or Where The Tone May Spread And Become Hard To Identify, The Tone Should Be Sent In The "Low" Position. The "High" Tone Level Should Be Used For Extremely Noisy And/Or Long Cables.
Adjustable Interruption Rate The Pr25A Interrupted Tone Is 577.5 Hz (Units Can Be Ordered With 500 Hz Tone). The Rate Of Interruption Is Adjustable, Allowing More Than One Unit To Operate Simultaneously In The Same Cable.
Ohmmeter The Built-In Ohmmeter Enables Balance Testing, Subscriber Instrument Identification, And Checking For Grounds And Shorts On Vacant Pairs.
Simplexing When The Pr 25A Is Used In Conjunction With The Optional Com 400A Cord, A Craftsman Can Identify Working Lines In Use Without Disrupting Customer Service. A Continuous Needle Deflection On The Volt Meter Assures A Craftsman That The Proper Connection To The Tip And Ring Conductors Has Been Made.
Standard Equipment The Pr25A Comes Standard With 577.5 Hz Tone, Three 9 Volt Batteries, A Heavy-Duty Leather Carrying Case And Cords (100B Ground Cord, 200B Line Cord And 300B Test Tone Cord). A Dual Purpose Carrying Strap Also Allows The Unit To Be Suspended At Eye Level For Convenience. The Com 400A Balance Test Cord, Which Allows Audible Balance Testing Of New Cable Section Pairs And Simplexing, Is Optional.
Features
Three Tone Levels Ohmmeter And Capacitance Check Visual Monitoring 577.5 Or 500 Hz Interrupted Tone Balance Testing Automatic Non-Interfering Tone Simplexing Adjustable Interruption Rate Description
The Model Pr25A Conductor Tagger And Analyzer Is A Multi-Function Test Set That Enables Fast, Accurate Tagging Of Working And Non-Working Lines, While Eliminating The Risk Of Disturbance To The Customer. A Patented Subscriber Sentinel Is Used To Guard Against Interruptions Or Delays Of Customer Calls. Talk Battery And Alerting Features Are Provided To Obtain And Maintain A Communications Link Between Points Along A Cable.
Automatic Operation In The Automatic Mode, The Pr25A Prevents Tones From Being Introduced To A Working Line. If The Tone Is Already Induced In A Pair While Tagging, And The Party On The Line Lifts The Receiver, The Pr25A Stops The Tone Before The Party Can Hear It, If The Tone Is Already Induced On A Pair, And The Party On The Line Is Called, The Unit Reacts To The Central Office Ringing Generator And Immediately Stops The Tone.
Visual Monitoring Cable Pairs Can Be Monitored At All Times During The Pair Identification Procedure. A Monitoring Position Is Used For Visual Monitoring Without Sending Tone. A Craftsman Can Visually Check The Pair Status From The Meter On Section Throws Or Cutovers Where Pairs Have Been Previously Identified And It'S Only Necessary To Determine Whether A Line Is In Use Prior To Cutting Or Swinging.
Three Tone Levels Three Tone Levels (Low, Medium, High) Allows The Craftsman To Tailor The Tone Output To His Specific Requirement. For Example, Normal Tagging Should Be Performed With The Pr25A Sending In The "Med" Tone Level Position. In Short Cables, Or Where The Tone May Spread And Become Hard To Identify, The Tone Should Be Sent In The "Low" Position. The "High" Tone Level Should Be Used For Extremely Noisy And/Or Long Cables.
Adjustable Interruption Rate The Pr25A Interrupted Tone Is 577.5 Hz (Units Can Be Ordered With 500 Hz Tone). The Rate Of Interruption Is Adjustable, Allowing More Than One Unit To Operate Simultaneously In The Same Cable.
Ohmmeter The Built-In Ohmmeter Enables Balance Testing, Subscriber Instrument Identification, And Checking For Grounds And Shorts On Vacant Pairs.
Simplexing When The Pr 25A Is Used In Conjunction With The Optional Com 400A Cord, A Craftsman Can Identify Working Lines In Use Without Disrupting Customer Service. A Continuous Needle Deflection On The Volt Meter Assures A Craftsman That The Proper Connection To The Tip And Ring Conductors Has Been Made.
Standard Equipment The Pr25A Comes Standard With 577.5 Hz Tone, Three 9 Volt Batteries, A Heavy-Duty Leather Carrying Case And Cords (100B Ground Cord, 200B Line Cord And 300B Test Tone Cord). A Dual Purpose Carrying Strap Also Allows The Unit To Be Suspended At Eye Level For Convenience. The Com 400A Balance Test Cord, Which Allows Audible Balance Testing Of New Cable Section Pairs And Simplexing, Is Optional.
