PLYMOUTH RUBBER 2065 CR BOOT 28 inch x 20 foot ROLL COHESIVE RUBBER TAPE
Available*
Item # 12040000
Model # 2065
$499.92
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TAPE
Material and Supplies
Tape- Cord - Slicker- Line
Tape
Plymouth Rubber Company
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
PLYMOUTH RUBBER COMPANY 2065 CR BOOT 28"x 20' ROLL COHESIVE RUBBER TAPE NEW Consists of one soft, uncured layer bonded to a cured, abrasion-resistant layer. Unique separator allows controlled removal at the user's discretion. An airtight, waterproof, gas-tight seal is formed when the uncured layer is bonded to itself. The Industry Standard for temporary splice coverings on communication and control cables. Maintains gas pressure in pressurized cable. Communications Industry Specification 7144.
Features and Benefits:
Strong bond holds pressure Easy tear separator Self bonding Excellent sealing properties
Recommended Uses:
For a temporary cover and moisture seal during splicing or repairing of insulated telephone cable. Standard Sizes: - 28 in. x 20 ft. 711 mm x 6.1m Description: CR is a two-layered tape with a white unvulcanized rubber tacky face (1/2 of total thickness) permanently bonded to a layer of black vulcanized rubber which provides the required mechanical strength. The white tacky side is covered with a removable Holland Cloth separator.
Features and Benefits:
Strong bond holds pressure Easy tear separator Self bonding Excellent sealing properties
Recommended Uses:
For a temporary cover and moisture seal during splicing or repairing of insulated telephone cable. Standard Sizes: - 28 in. x 20 ft. 711 mm x 6.1m Description: CR is a two-layered tape with a white unvulcanized rubber tacky face (1/2 of total thickness) permanently bonded to a layer of black vulcanized rubber which provides the required mechanical strength. The white tacky side is covered with a removable Holland Cloth separator.
