KLEIN 646-1/4-INS Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft 092644652264 NEW
Available*
Item # 28882700
Model # 646-1/4-INS
$19.99
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
NUTDRIVERS
Tools
Hand Tools
Nut Drivers
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
KLEIN 646-1/4-INS Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft 092644652264 NEW
KLEIN 646-1/4-INS Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft 092644652264 NEW
P/N 646-1/4-INS Insulated 1/4-Inch Nut Driver 6-Inch Hollow Shaft UPC 092644652264
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol Two layers of insulation provide protection against electric shock Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications Made in USA Tip-Ident quickly identifies nut driver size Cushion-Grip™ handles for greater torque and comfort
Specifications Application: Stacked Circuit Boards, Long Bolt Applications Special Features: Tip-Ident Quickly Identifies Nut Driver Size
Measurement Standard: SAE Nut Driver Sizes: 1/4'' Magnetic: No
Shaft Length: 6'' (15.2 cm) Material: Steel Insulated: Yes
Handle Material: High-Dielectric Plastic Color Code: Red Overall Length: 9.75'' (24.8 cm) Standard: IEC 60900 and ASTM F1505 Type: Hollow
Weight: 3.2 oz (91 g) UPC: 092644652264
Warnings Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source. Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source. Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. Wear approved eye protection. Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way. Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
KLEIN 646-1/4-INS Insulated 1/4-Inch Nut Driver, 6-Inch Hollow Shaft 092644652264 NEW
P/N 646-1/4-INS Insulated 1/4-Inch Nut Driver 6-Inch Hollow Shaft UPC 092644652264
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol Two layers of insulation provide protection against electric shock Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications Made in USA Tip-Ident quickly identifies nut driver size Cushion-Grip™ handles for greater torque and comfort
Specifications Application: Stacked Circuit Boards, Long Bolt Applications Special Features: Tip-Ident Quickly Identifies Nut Driver Size
Measurement Standard: SAE Nut Driver Sizes: 1/4'' Magnetic: No
Shaft Length: 6'' (15.2 cm) Material: Steel Insulated: Yes
Handle Material: High-Dielectric Plastic Color Code: Red Overall Length: 9.75'' (24.8 cm) Standard: IEC 60900 and ASTM F1505 Type: Hollow
Weight: 3.2 oz (91 g) UPC: 092644652264
Warnings Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source. Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source. Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. Wear approved eye protection. Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way. Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
