Plp 2875001Te Lite Tens Dead-End Adss With Te-5 .375-.414 *Order Minimum* 25 New
Available*
Item # 30182412
Model # 2875001TE
$32.29
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Deadend
Material and Supplies
Hardware- Screws- Bolts
Clamps
Preformed Line Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Plp 2875001Te Lite Tens Dead-End Adss With Te-5 .375-.414 *Order Minimum* 25 New
Plp 2875001Te Lite Tens Dead-End Adss With Te-5 .375-.414 *Order Minimum* 25 New
P/N 2875001Te Lite Tension Dead-End Adss With Te-5 Cable Diameter Range 0.375 - 0.414 Inches ( 9.5 - 10.5 Mm) Dead-End With Thimble Eye Color Code Red Length 28 Inches (0.71 Mm) *Order Minimum* 25
The Fiberlign Lite Tension Dead-End Is A Dielectric Dead-End Designed To Terminate Short Span, Low Tension Adss Fi Ber Optic Cables In Low-Voltage Environments. Its Single-Layer Component Design Off Ers An Economical Solution For Very Light Loads. The Product Eff Ectively Transfers The Low Axial Load On The Cable At The End Of The Dead-End Legs To Low Uniform Radial Compression Near The Dead-End Loop.
Features And Benefits Small Diameter Wires That Comprise Each Dead-End Are A Mixture Of Aluminum And Aluminum-Clad Steel That Provide Superior Fatigue Strength To Ensure Long-Term Performance Dead-End Legs Have A Pliable Latex Coating And Fl Ared Rod Ends To Avoid Scoring Or Abrasion To The Cable Jacket During And After Installation Dead-End Loop Will Fi T A Minimum Cable Diameter Of 1-1/2" (38.1 Mm) And A Maximum Of 2-1/4" (57.1 Mm) Designed To Fi T Over Common Guy Wire Dead-End Pole Fi Ttings Extended Dead-End Loop Reduces The Need For An Extension Link Optimized Compact Length That Allows For Fast And Easy Installation Can Be Used On Most Brands Of Adss Cable That Have Low Strengths And Standard Jackets
Plp 2875001Te Lite Tens Dead-End Adss With Te-5 .375-.414 *Order Minimum* 25 New
P/N 2875001Te Lite Tension Dead-End Adss With Te-5 Cable Diameter Range 0.375 - 0.414 Inches ( 9.5 - 10.5 Mm) Dead-End With Thimble Eye Color Code Red Length 28 Inches (0.71 Mm) *Order Minimum* 25
The Fiberlign Lite Tension Dead-End Is A Dielectric Dead-End Designed To Terminate Short Span, Low Tension Adss Fi Ber Optic Cables In Low-Voltage Environments. Its Single-Layer Component Design Off Ers An Economical Solution For Very Light Loads. The Product Eff Ectively Transfers The Low Axial Load On The Cable At The End Of The Dead-End Legs To Low Uniform Radial Compression Near The Dead-End Loop.
Features And Benefits Small Diameter Wires That Comprise Each Dead-End Are A Mixture Of Aluminum And Aluminum-Clad Steel That Provide Superior Fatigue Strength To Ensure Long-Term Performance Dead-End Legs Have A Pliable Latex Coating And Fl Ared Rod Ends To Avoid Scoring Or Abrasion To The Cable Jacket During And After Installation Dead-End Loop Will Fi T A Minimum Cable Diameter Of 1-1/2" (38.1 Mm) And A Maximum Of 2-1/4" (57.1 Mm) Designed To Fi T Over Common Guy Wire Dead-End Pole Fi Ttings Extended Dead-End Loop Reduces The Need For An Extension Link Optimized Compact Length That Allows For Fast And Easy Installation Can Be Used On Most Brands Of Adss Cable That Have Low Strengths And Standard Jackets
