DCD 32620-550 Duct Entry Adapter 5" Guide X 5" Duct NEW
Available*
Item # 30513705
Model # 32620-550
$272.82
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
FEEDERS
Tools
Line Construction- Placing
Feeder Tubes-Elephant
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD 32620-550 Duct Entry Adapter 5" Guide X 5" Duct NEW
DCD 32620-550 Duct Entry Adapter 5" Guide X 5" Duct NEW
P/N 32620-550 DCD DESIGN/CABLE SPINNING EQUIPMENT Duct Entry Adapter 5" Guide X 5" Duct NEW Use with Flexible Guide Diameter 5 inches Nominal Duct Size 5 inches
The DCD DESIGN/CABLE SPINNING EQUIPMENT Flexible Cable Guide comes in 5 ft or 10 ft lengths. Custom lengths are also available. At each end there is a polyurethane coupling that can be used for attaching two lengths together and for attaching the duct adapter and the cable entry cone. There are 3 different diameters or sizes of flexible guides. The 4" size has adapters suitable for 2", 3" and 4" duct sizes, the 5" size only fits 5" duct and the larger 6" unit has adapters suitable for 4", 5" and 6" ducting. Each duct adapter is fitted with a spray nozzle suitable for the DCD DESIGN/CABLE SPINNING EQUIPMENT TUBE-LUBEŽ 326. There is one half of a quick-disconnect coupling attached to the nozzle that will direct the lubricant onto the cable as it is fed into the ducting. Like the end fittings, the duct adapters are made from polyurethane and are also sold separately.
DCD 32620-550 Duct Entry Adapter 5" Guide X 5" Duct NEW
P/N 32620-550 DCD DESIGN/CABLE SPINNING EQUIPMENT Duct Entry Adapter 5" Guide X 5" Duct NEW Use with Flexible Guide Diameter 5 inches Nominal Duct Size 5 inches
The DCD DESIGN/CABLE SPINNING EQUIPMENT Flexible Cable Guide comes in 5 ft or 10 ft lengths. Custom lengths are also available. At each end there is a polyurethane coupling that can be used for attaching two lengths together and for attaching the duct adapter and the cable entry cone. There are 3 different diameters or sizes of flexible guides. The 4" size has adapters suitable for 2", 3" and 4" duct sizes, the 5" size only fits 5" duct and the larger 6" unit has adapters suitable for 4", 5" and 6" ducting. Each duct adapter is fitted with a spray nozzle suitable for the DCD DESIGN/CABLE SPINNING EQUIPMENT TUBE-LUBEŽ 326. There is one half of a quick-disconnect coupling attached to the nozzle that will direct the lubricant onto the cable as it is fed into the ducting. Like the end fittings, the duct adapters are made from polyurethane and are also sold separately.
