Uniweld Nv1 Nitro Vue With 1/4 Inch Fittings, (Patent Pending)
Available*
Item # 37836518
Model # NV1
$93.89
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Torches
Tools
Torches- Heat Shrink
Kits
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Uniweld Nv1 Nitro Vue With 1/4 Inch Fittings, (Patent Pending)
Uniweld Nv1 Nitro Vue With 1/4 Inch Fittings, (Patent Pending)
Uniweld P/N Nv1 Nitrovue With 1/4 Inch Flare Fittings Patent Pending
Part# Nv1 Nitrovue™ Simplifies The Purging Of Nitrogen During The Brazing Of Copper Tubing In Air Conditioning And Refrigeration Systems With An - Easy - To Read Flow Indicator Label And A Precision Adjustable Valve To Control The Low Flow Of Nitrogen Gas.
The Bright Orange Float Ball And Tube Are Fortified And Protected In The Aluminum Body With Wide Open Windows For A Clear View. The Easy To See Orange Float Ball Visually Confirms The Nitrogen Is Flowing And Allows The Technician To First - Purge - The Copper Lines At 20+ Scfh And Then Reduce The Flow To -Braze - At 3-5 Scfh During The Brazing Process Thus Conserves Its Consumption And Reduces Operating Cost. The Nitrogen Must Be Flowing To Displace The Oxygen Inside The Tubing During The Brazing Process, Preventing Internal Oxidation And The Resulting Scale. Scale Build Up Inside The Tubing Can Cause Blockage In The Txv And Within The Air Conditioning And Refrigeration System Resulting In Premature Failure. If The Ball Does Not Rise In The Tube There Is No Flow Of Nitrogen Only Static Pressure And Oxygen Is Not Being Displaced. The Nv1 Must Be Connected To A Nitrogen Regulator With The Delivery Pressure Set At 60 Psi To Control The Nitrogen Gas Pressure.
The Nv1 Is Protected From Over Pressure With A Reseatable Safety Blow Off That Opens At 200+ Psi.
Uniweld Nv1 Nitro Vue With 1/4 Inch Fittings, (Patent Pending)
Uniweld P/N Nv1 Nitrovue With 1/4 Inch Flare Fittings Patent Pending
Part# Nv1 Nitrovue™ Simplifies The Purging Of Nitrogen During The Brazing Of Copper Tubing In Air Conditioning And Refrigeration Systems With An - Easy - To Read Flow Indicator Label And A Precision Adjustable Valve To Control The Low Flow Of Nitrogen Gas.
The Bright Orange Float Ball And Tube Are Fortified And Protected In The Aluminum Body With Wide Open Windows For A Clear View. The Easy To See Orange Float Ball Visually Confirms The Nitrogen Is Flowing And Allows The Technician To First - Purge - The Copper Lines At 20+ Scfh And Then Reduce The Flow To -Braze - At 3-5 Scfh During The Brazing Process Thus Conserves Its Consumption And Reduces Operating Cost. The Nitrogen Must Be Flowing To Displace The Oxygen Inside The Tubing During The Brazing Process, Preventing Internal Oxidation And The Resulting Scale. Scale Build Up Inside The Tubing Can Cause Blockage In The Txv And Within The Air Conditioning And Refrigeration System Resulting In Premature Failure. If The Ball Does Not Rise In The Tube There Is No Flow Of Nitrogen Only Static Pressure And Oxygen Is Not Being Displaced. The Nv1 Must Be Connected To A Nitrogen Regulator With The Delivery Pressure Set At 60 Psi To Control The Nitrogen Gas Pressure.
The Nv1 Is Protected From Over Pressure With A Reseatable Safety Blow Off That Opens At 200+ Psi.
