UNIWELD 94184 A/C SYSTEM FLUSH KIT WITH 1/4 inch FITTINGS UPC 94184
Available*
Item # 37837505
Model # 94184
$110.43
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TORCHES
Tools
Torches- Heat Shrink
HVAC and Plumbing
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
UNIWELD 94184 A/C SYSTEM FLUSH KIT WITH 1/4" FITTINGS UPC 94184 NEW
The A/C Flush Kit is ideal for system flushing after compressor burnouts and will remove contaminates, moisture and acid from the evaporator and condenser. It is also used during retrofits and flushing R22 line sets for R410A conversions. The R22 mineral based oil system is not compatible with the R410A ester oil based system and if cross contaminated will cause the oils to coagulate and could ultimately lead to a system failure.
Part # Description 94184 A/C System Flush Kit BG1ACA Blowgun with A/C Rubber Tip Nozzle H20100D 24” Service Hose FG24A A/C Rubber Tip Nozzle with 1/8” N.P.T. Fitting - Simply add solvent to the reusable canister and with the use of nitrogen at approximately 70 PSI delivery pressure, reverse flush the evaporator and condenser removing contaminates, moisture and acid. Special design features include: - Pressure Relief Valve opens at 180 to 190 PSI protecting the cylinder and equipment from overpressure. - Valve Assembly has Liquid Dip Tube. - Ball Valve with 1/4 turn Open/Close. - 2 ft. Service Hose - Reusable canister holds up to 18 oz. - Designed to work with any A/C flush solvent that can be mixed with pressurized air. - Blowgun with Rubber Tip Nozzle for Copper Tubing 3/8" to 1-1/8" O.D.
Item Weight : 2.1 pounds Product Dimensions : 11.6 x 2.9 x 2.9 inches
The A/C Flush Kit is ideal for system flushing after compressor burnouts and will remove contaminates, moisture and acid from the evaporator and condenser. It is also used during retrofits and flushing R22 line sets for R410A conversions. The R22 mineral based oil system is not compatible with the R410A ester oil based system and if cross contaminated will cause the oils to coagulate and could ultimately lead to a system failure.
Part # Description 94184 A/C System Flush Kit BG1ACA Blowgun with A/C Rubber Tip Nozzle H20100D 24” Service Hose FG24A A/C Rubber Tip Nozzle with 1/8” N.P.T. Fitting - Simply add solvent to the reusable canister and with the use of nitrogen at approximately 70 PSI delivery pressure, reverse flush the evaporator and condenser removing contaminates, moisture and acid. Special design features include: - Pressure Relief Valve opens at 180 to 190 PSI protecting the cylinder and equipment from overpressure. - Valve Assembly has Liquid Dip Tube. - Ball Valve with 1/4 turn Open/Close. - 2 ft. Service Hose - Reusable canister holds up to 18 oz. - Designed to work with any A/C flush solvent that can be mixed with pressurized air. - Blowgun with Rubber Tip Nozzle for Copper Tubing 3/8" to 1-1/8" O.D.
Item Weight : 2.1 pounds Product Dimensions : 11.6 x 2.9 x 2.9 inches
