UNIWELD TYPE28-2 ROSEBUD HEATING TIP UPC 31450
Available*
Item # 37838652
Model # 31450
$73.94
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TORCHES
Tools
Torches- Heat Shrink
HVAC and Plumbing
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
UNIWELD TYPE28-2 ROSEBUD HEATING TIP UPC 31450 NEW-
Heat up all the fittings of a heat pump reversing valve at once for easy removal of the defective valve with the Tuning Fork™ Tip. Remove and install the new valve without altering the original copper tube fittings. The Tuning Fork™ Tip makes it possible to work efficiently in tight spaces and get even heat quickly in tough-to-reach areas.
Proudly Made in the USA and 100% Flame Tested Acetylene Consumption SCFH: 9 Acetylene Pressure PSIG: 7 Oxygen Pressure PSIG: 8 Brazing Copper Tubing : 1/8" to 1-5/8" Welding Metal Thickness n/a Replacement Nut & Mixer: UM17-5
WEIGHT: 8 ounces DIMENSIONS: 11.2 x 0.7 x 3.1 inches
***NOTE: When acetylene weld/braze tips are used with fuel gases, use one size larger tip and maximum pressures to obtain proper heat. The **chart indicates approximate torch oxygen consumption with a neutral flame ratio for various gases: Pressures are approximate for hose length up to 25 ft.; increase for longer lengths about 3 psig per 25 ft. - increase working pressure 2-3 psig for check valves and flashback arrestors. Acetylene delivery pressure should not exceed 15 psig under flow conditions.
**CHART: 1.1 Oxygen to 1 Acetylene 3.5 Oxygen to 1 MAP//PRO (Propylene) 4 Oxygen to 1 Propane / Natural Gas
Heat up all the fittings of a heat pump reversing valve at once for easy removal of the defective valve with the Tuning Fork™ Tip. Remove and install the new valve without altering the original copper tube fittings. The Tuning Fork™ Tip makes it possible to work efficiently in tight spaces and get even heat quickly in tough-to-reach areas.
Proudly Made in the USA and 100% Flame Tested Acetylene Consumption SCFH: 9 Acetylene Pressure PSIG: 7 Oxygen Pressure PSIG: 8 Brazing Copper Tubing : 1/8" to 1-5/8" Welding Metal Thickness n/a Replacement Nut & Mixer: UM17-5
WEIGHT: 8 ounces DIMENSIONS: 11.2 x 0.7 x 3.1 inches
***NOTE: When acetylene weld/braze tips are used with fuel gases, use one size larger tip and maximum pressures to obtain proper heat. The **chart indicates approximate torch oxygen consumption with a neutral flame ratio for various gases: Pressures are approximate for hose length up to 25 ft.; increase for longer lengths about 3 psig per 25 ft. - increase working pressure 2-3 psig for check valves and flashback arrestors. Acetylene delivery pressure should not exceed 15 psig under flow conditions.
**CHART: 1.1 Oxygen to 1 Acetylene 3.5 Oxygen to 1 MAP//PRO (Propylene) 4 Oxygen to 1 Propane / Natural Gas
