UNIWELD VV1 VAPOR VUE, (PATENT PENDING) UPC 94188
Available*
Item # 37838691
Model # 94188
$88.37
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TORCHES
Tools
Torches- Heat Shrink
HVAC and Plumbing
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
UNIWELD VV1 VAPOR VUE, (PATENT PENDING) UPC 94188 NEW
VAPORVUE with 1/4" Flare Fittings - HVAC/R Absorbs heat naturally and flashes the liquid refrigerant from the cylinder and charges into the system as a vapor. Connecting the VaporVueŽ to the low side of your charging manifold will increase the charging rate up to 8 times faster and the liquid is controlled by adjusting the manifold valve and monitoring the vapor rate through the double sight glass. VaporVueŽ is factory pressure tested at 800 psi and can be used to charge any refrigeration & air conditioning system using R-410A, CFC, HCFC & HFC; Zeotropic and Azeotropic refrigerants without the danger of liquid slugging and damaging the compressor. Placing the manifold & VaporVueŽ over hot discharge airflow of the condensing unit will increase the heat exchange and charging rate efficiency. Patent Pending.
WEIGHT: 1 LB
VAPORVUE with 1/4" Flare Fittings - HVAC/R Absorbs heat naturally and flashes the liquid refrigerant from the cylinder and charges into the system as a vapor. Connecting the VaporVueŽ to the low side of your charging manifold will increase the charging rate up to 8 times faster and the liquid is controlled by adjusting the manifold valve and monitoring the vapor rate through the double sight glass. VaporVueŽ is factory pressure tested at 800 psi and can be used to charge any refrigeration & air conditioning system using R-410A, CFC, HCFC & HFC; Zeotropic and Azeotropic refrigerants without the danger of liquid slugging and damaging the compressor. Placing the manifold & VaporVueŽ over hot discharge airflow of the condensing unit will increase the heat exchange and charging rate efficiency. Patent Pending.
WEIGHT: 1 LB
