Noyes Ols2 1310 Nm Laser Sourcesingle Mode Repaired

Noyes Ols2 1310 Nm Laser Sourcesingle Mode Repaired Ols 2 Laser Light Source The Ols 2 Laser Source Is A Cost-Effective, Rugged, Handheld Instrument Designed For Performing Insertion Loss Measurements On Single-Mode Fiber Optic Links When Used With An Optical Power Meter. When Paired With An Optical Fiber Identifier, The Ols 2 May Be Used For Fiber Identification. The Laser Output Is Stabilized To Ensure Accurate Test Results Per Current Tia/Eia Requirements. Three Versions Of The Ols 2 Are Available For Measurements At 1310 Nm, 1550 Nm, 1625 Nm. This Light Source Offers 2 Modes Of Operation: Continuous Wave (Cw) And 2 Khz Modulated Tone. [Laser Active], [Battery], And [External Power] Indicators Identify The Enabled Laser, Battery Charge Status, And External Power Presence. The Output Port Is Equipped With Sc Style Connector. The Ols 2 Laser Sources Operate On Disposable Batteries Or Ac Adapter. The Ols 2 Is Fully N.I.S.T. Traceable. Features Rugged, Handheld, Lightweight Certify Single-Mode Links Per Tia/Eia Standards Cw Or 2 Khz Modulated Tone Long Battery Life Low Battery Indicator Adjustable Output Cost-Effective, Easy To Use N.I.S.T. Traceable Specifications Optical Specifications Ols 2-1310 Output Wavelength 1310 ±20 Nm Output Power1 -5 Dbm Laser Classification Class 1 (Fda 21 Cfr 1040.10 And 1040.11, And Iec 60825-1) Output Connector2 Sc Modes Of Operation3 Cw And 2 Khz Spectral Width (Fwhm) 5 Nm (Max) Stability ± 0.1 Db Over 1 Hour (After 20 Min. Warm-Up) ± 0.15 Db Over 8 Hours (After 20 Min. Warm-Up) General Specifications Power Typical 40 Hours With 9V Battery, Optional Ac Adapter Operating Temperature -10 To 50°C Storage Temperature -30 To 60°C Size (H X W X D) 5.5 X 3.2 X 1.5 In (14.0 X 8.1 X 3.8 Cm) Weight 0.65 Lb (.29 Kg)