POLYWATER CG-13 16-Oz Type CG Aerosol (net wt 13 oz) 02786803900 Case OF 12
Available*
Item # 55461360
Model # CG-13
$21.29
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CLEANERS
Material and Supplies
Cleaners- Solvents
Cleaning supplies
Polywater
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
AMERICAN POLYWATER CG-13 16-Oz Type CG™ Aerosol (net wt 13 oz) 02786803900 Case OF 12 AMERICAN AMERICAN POLYWATER CG-13 16-Oz Type CG™ Aerosol (net wt 13 oz) 02786803900 Case OF 12
95% Pure Zinc!
CG™ Cold Galvanizing Spray for Weld Coating, Metal Protection and Repair
Type CG® Cold Galvanizing -- Industrial Aerosol Spray for Metal Protection and Repair. Contains 95% Pure Zinc. Forms zinc-rich Coating That Prevents Rust and Inhibits Corrosion. Easy On-The-Job Application. Ideal Primer or Touch-Up Paint. Quick Drying with no Chlorinated Solvents. Excellent for Weld coating.
Type CG™ Cold Galvanize is an industrial aerosol coating for metal protection and repair. Powerful CG™ contains 95% pure zinc; when sprayed on metal it forms a zinc-rich coating that prevents rust and inhibits corrosion through sacrificial galvanic action. Type CG™ aerosol offers easy on-the-job application, and is ideal as a primer or for touch-up. Quick drying CG™ contains no chlorinated solvents, and is excellent for weld coating. ADVANTAGES Protects metal Prevents rust and inhibits corrosion Excellent for weld coating Contains no listed carcinogens Contains no CFC's or HCFC's Contains no chlorinated solvents
Ideal as a primer or touch-up paint Similar to hot-dip galvanizing Efficient nozzle minimizes drips/runs Dries quickly Easy on-the-job application
APPLICATIONS Damaged galvanized steel Metal equipment and boxes Welded parts and welds Springs and coils HVAC equipment
Pipes and water tanks Flood restoration and repair Paint primer and touch-up Much, much more
USE DIRECTIONS
Apply to clean, dry metal surfaces. Brush off loose rust or scale. Clean surface with Type HP™ or Type FD™ Cleaner/Degreaser as necessary. Shake the can vigorously until internal agitator rolls freely. Spray using light, even strokes about 18 (1/2 m) from the surface. Several thin coats are recommended. Allow 15 minutes drying time between coats. Final coat should dry thoroughly (up to 24 hours). To avoid clogging, invert can and spray until only air escapes.
95% Pure Zinc!
CG™ Cold Galvanizing Spray for Weld Coating, Metal Protection and Repair
Type CG® Cold Galvanizing -- Industrial Aerosol Spray for Metal Protection and Repair. Contains 95% Pure Zinc. Forms zinc-rich Coating That Prevents Rust and Inhibits Corrosion. Easy On-The-Job Application. Ideal Primer or Touch-Up Paint. Quick Drying with no Chlorinated Solvents. Excellent for Weld coating.
Type CG™ Cold Galvanize is an industrial aerosol coating for metal protection and repair. Powerful CG™ contains 95% pure zinc; when sprayed on metal it forms a zinc-rich coating that prevents rust and inhibits corrosion through sacrificial galvanic action. Type CG™ aerosol offers easy on-the-job application, and is ideal as a primer or for touch-up. Quick drying CG™ contains no chlorinated solvents, and is excellent for weld coating. ADVANTAGES Protects metal Prevents rust and inhibits corrosion Excellent for weld coating Contains no listed carcinogens Contains no CFC's or HCFC's Contains no chlorinated solvents
Ideal as a primer or touch-up paint Similar to hot-dip galvanizing Efficient nozzle minimizes drips/runs Dries quickly Easy on-the-job application
APPLICATIONS Damaged galvanized steel Metal equipment and boxes Welded parts and welds Springs and coils HVAC equipment
Pipes and water tanks Flood restoration and repair Paint primer and touch-up Much, much more
USE DIRECTIONS
Apply to clean, dry metal surfaces. Brush off loose rust or scale. Clean surface with Type HP™ or Type FD™ Cleaner/Degreaser as necessary. Shake the can vigorously until internal agitator rolls freely. Spray using light, even strokes about 18 (1/2 m) from the surface. Several thin coats are recommended. Allow 15 minutes drying time between coats. Final coat should dry thoroughly (up to 24 hours). To avoid clogging, invert can and spray until only air escapes.
