PLP BLSR-9123 REDUCING STRAND SPLICE 3/8-5/16 *ORDER MINIMUM* 25
Available*
Item # 55711300
Model # BLSR-9123
$20.68
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CLAMP
Material and Supplies
Hardware- Screws- Bolts
Strand Vise- Splice
Preformed Line Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Preformed Line Products BLSR-9123 SPLICE REDUCER 6M-10M BENZINAL COAT, NEW
Reducing Splice Reducing Splice PREFORMED. Reducing Splices are intended to permanently join two strands of different diameters. Application by hand.no tools required.is fast, easy, uniform and can be visually checked to assure proper application. Without any loose parts, jaws to seat, or teeth to bite into the strand, the Reducing Splice is designed to permit spinner-free travel without adjusting the gates or lifting the spinner over the splice. The PREFORMED Reducing Splice is made of material completely compatible with the strand to which it is applied and can be used in any environment. Product Identification Tag Center Mark And Size Color Code Marked Section Is For Smaller Diameter Strand Only Galvanized Steel, C-Coat for use on Extra High Strength or Utility Grade Strands Catalog Number Standard Size Length Reduced End Color Code Per Carton Non-Reduced End Color From To Units Wt./Lbs. Code LSR-2122 5.16" ." 35" Yellow 50 33 Black LSR-2123 3.8" 5.16" 42" Black 25 25 Orange LSR-2124 7.16" 3.8" 50" Orange 25 39 Green LSR-2125 3.8" ." 42" Yellow 50 41 Orange
Reducing Splice Reducing Splice PREFORMED. Reducing Splices are intended to permanently join two strands of different diameters. Application by hand.no tools required.is fast, easy, uniform and can be visually checked to assure proper application. Without any loose parts, jaws to seat, or teeth to bite into the strand, the Reducing Splice is designed to permit spinner-free travel without adjusting the gates or lifting the spinner over the splice. The PREFORMED Reducing Splice is made of material completely compatible with the strand to which it is applied and can be used in any environment. Product Identification Tag Center Mark And Size Color Code Marked Section Is For Smaller Diameter Strand Only Galvanized Steel, C-Coat for use on Extra High Strength or Utility Grade Strands Catalog Number Standard Size Length Reduced End Color Code Per Carton Non-Reduced End Color From To Units Wt./Lbs. Code LSR-2122 5.16" ." 35" Yellow 50 33 Black LSR-2123 3.8" 5.16" 42" Black 25 25 Orange LSR-2124 7.16" 3.8" 50" Orange 25 39 Green LSR-2125 3.8" ." 42" Yellow 50 41 Orange
