ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT EACH
Available*
Item # 55723889
Model # 5081
$17.41
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CLAMP
Material and Supplies
Hardware- Screws- Bolts
Clamps
Allied Bolt
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT EACH
ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT EACH
ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT SOLD PER EACH
Used for attaching strand to corner poles. Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 5/8"-11 track bolts with attached square nuts. Clamp plates are 2-3/16" wide and 7" long. One plate is flared at each end to facilitate pulling strand through the clamp and has a substantial projecting lip to retain the strand in the grooves. The center hole on the Corner Suspension Clamp is for use with a 5/8" or 3/4" diameter bolt. Hot dip galvanized to meet ASTM Specification A153.
ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT EACH
ALLIED 5081 ANGLED CLAMP B SUSPENSION 3 BOLT CLAMP 1/4-7/16 STRAND 5/8 BOLT SOLD PER EACH
Used for attaching strand to corner poles. Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 5/8"-11 track bolts with attached square nuts. Clamp plates are 2-3/16" wide and 7" long. One plate is flared at each end to facilitate pulling strand through the clamp and has a substantial projecting lip to retain the strand in the grooves. The center hole on the Corner Suspension Clamp is for use with a 5/8" or 3/4" diameter bolt. Hot dip galvanized to meet ASTM Specification A153.
