KLEIN 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 UPC 092644472534 NEW
Item # 80020250
Model # 47253-4
Call for FREE Estimate
CLICK OR DIAL 800-422-4823
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
GRIPS
Tools
Line Construction- Placing
Grips- Strand- Lashing Wire
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
KLEIN 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 UPC 092644472534 NEW
KLEIN 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 UPC 092644472534 NEW
P/N 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 NEW UPC 092644472534
Constructed of high strength alloy steel, hot forged, heat treated, and galvanized for toughness, strength, and corrosion resistance Suitable for OPGW Offers a full range of interchangeable liners to be inserted between the upper and lower jaws of the grip Cable diameter range: .236'' (6 mm) to .906'' (23 mm) Maximum working load: 6750 lbs. (3062 kg)
Specifications Application: OPGW Cable Diameter: 0.236'' to 0.906'' (5.99 to 23.01 mm) Maximum Safe Load: 6750 lb (3062 kg) Weight: 15.0 lb (6.8 kg) UPC: 092644472534
Warnings Grips are to be used for temporary installation, not for permanent anchorage When used on/or near energized lines, ground, insulate, or isolate grip before pulling Do not exceed capacity Always match proper size and type of grip to application Before each use, clean jaw area and inspect grip for proper operation to avoid slippage
KLEIN 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 UPC 092644472534 NEW
P/N 1628-80 Interchangeable Jaw Grip Body OPGW 47253-4 NEW UPC 092644472534
Constructed of high strength alloy steel, hot forged, heat treated, and galvanized for toughness, strength, and corrosion resistance Suitable for OPGW Offers a full range of interchangeable liners to be inserted between the upper and lower jaws of the grip Cable diameter range: .236'' (6 mm) to .906'' (23 mm) Maximum working load: 6750 lbs. (3062 kg)
Specifications Application: OPGW Cable Diameter: 0.236'' to 0.906'' (5.99 to 23.01 mm) Maximum Safe Load: 6750 lb (3062 kg) Weight: 15.0 lb (6.8 kg) UPC: 092644472534
Warnings Grips are to be used for temporary installation, not for permanent anchorage When used on/or near energized lines, ground, insulate, or isolate grip before pulling Do not exceed capacity Always match proper size and type of grip to application Before each use, clean jaw area and inspect grip for proper operation to avoid slippage
