KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3
Available*
Item # 80020635
Model # ET910
$43.99
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
POWER
Test Equipment
Electric Power
Voltage
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3
KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3
P/N ET910 USB Digital Meter and Tester USB-A (Type A) Overall Length: 4.31'' (11 cm) Overall Height: 0.98'' (2.5 cm) Overall Width: 2.15'' (5.5 cm) Weight: 2.80 oz (79.4 g) UPC: 092644691393
3 to 20V DC; Current: 0.05 to 3A (monitoring mode) Built-in test loads of 0.5A, 1A, 2A, and 3A; no external test load required Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated) Tests most common standard USB-A ports, including Qualcomm Quick ChargeŽ ports Store and recall up to 10 readings Voltage and current overload detection Hi-resolution LCD for clear visibility in environments with low ambient lighting Durable cable to allow easy access to hard-to-reach ports Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands Built to withstand a 6.6-Foot (2m) drop No batteries needed; powered by the USB port being tested
Warnings To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death. This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current. Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device. Do NOT use during electrical storms or in wet weather. Do NOT use if meter appears damaged. Use caution when working with voltages above 25V RMS or 24V DC. Such voltages pose a shock hazard.
KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3
P/N ET910 USB Digital Meter and Tester USB-A (Type A) Overall Length: 4.31'' (11 cm) Overall Height: 0.98'' (2.5 cm) Overall Width: 2.15'' (5.5 cm) Weight: 2.80 oz (79.4 g) UPC: 092644691393
3 to 20V DC; Current: 0.05 to 3A (monitoring mode) Built-in test loads of 0.5A, 1A, 2A, and 3A; no external test load required Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated) Tests most common standard USB-A ports, including Qualcomm Quick ChargeŽ ports Store and recall up to 10 readings Voltage and current overload detection Hi-resolution LCD for clear visibility in environments with low ambient lighting Durable cable to allow easy access to hard-to-reach ports Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands Built to withstand a 6.6-Foot (2m) drop No batteries needed; powered by the USB port being tested
Warnings To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death. This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current. Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device. Do NOT use during electrical storms or in wet weather. Do NOT use if meter appears damaged. Use caution when working with voltages above 25V RMS or 24V DC. Such voltages pose a shock hazard.
