KLEIN 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 UPC 092644479458 NEW
Available*
Item # 80022232
Model # 47945-8
$593.69
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
GRIPS
Tools
Line Construction- Placing
Grips- Strand- Lashing Wire
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
KLEIN 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 UPC 092644479458 NEW
KLEIN 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 UPC 092644479458 NEW
P/N 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 NEW UPC 092644479458
Aggressive sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables 5'' jaw length increases surface area contact with the cable, minimizing cable damage Designed for cable sizes 0.218-Inch to 0.55-Inch (5.54 mm to 13.97 mm) Manufactured from drop-forged, heat-treated steel for excellent durability with a spring that closes grip on cable helping to maintain initial position Made in USA Locking handle keeps jaw open while grip is placed on cable with a hot stick Maximum Safe Load is 8000-Pound (3629 kg)
This Chicago Grip is designed specifically to work with coated guy wire. This authentic Klein Grip is manufactured, inspected and tested in the USA. Klein grips are made of drop-forged, quality US steel and heat treated for strength and durability.
Specifications Type: Chicago Grip Application: Wire Pulling Special Features: Sawtooth Jaw Profile Resists Build-up Overall Length: 13.3'' (33.8 cm) Overall Height: 2.5'' (6.4 cm) Overall Width: 7.6'' (19.3 cm) Material: Alloy Steel Cable Type: Aircraft, EHS, Messenger, Guy Strand Cable Diameter: 0.218'' to 0.55'' (5.54 to 13.97 mm) Hot Latch: N Swing Latch: N Spring: Y Locking Handle: Y Jaw Type: Aggressive Jaw Length: 5'' (12.7 cm) Maximum Safe Load: 8000 lb (3629 kg) Weight: 6.0 lb (2.7 kg) UPC: 092644479458
Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for permanent anchorage.
KLEIN 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 UPC 092644479458 NEW
P/N 16845C ChicagoŽ Grip Coated Guy Wire 47945-8 NEW UPC 092644479458
Aggressive sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables 5'' jaw length increases surface area contact with the cable, minimizing cable damage Designed for cable sizes 0.218-Inch to 0.55-Inch (5.54 mm to 13.97 mm) Manufactured from drop-forged, heat-treated steel for excellent durability with a spring that closes grip on cable helping to maintain initial position Made in USA Locking handle keeps jaw open while grip is placed on cable with a hot stick Maximum Safe Load is 8000-Pound (3629 kg)
This Chicago Grip is designed specifically to work with coated guy wire. This authentic Klein Grip is manufactured, inspected and tested in the USA. Klein grips are made of drop-forged, quality US steel and heat treated for strength and durability.
Specifications Type: Chicago Grip Application: Wire Pulling Special Features: Sawtooth Jaw Profile Resists Build-up Overall Length: 13.3'' (33.8 cm) Overall Height: 2.5'' (6.4 cm) Overall Width: 7.6'' (19.3 cm) Material: Alloy Steel Cable Type: Aircraft, EHS, Messenger, Guy Strand Cable Diameter: 0.218'' to 0.55'' (5.54 to 13.97 mm) Hot Latch: N Swing Latch: N Spring: Y Locking Handle: Y Jaw Type: Aggressive Jaw Length: 5'' (12.7 cm) Maximum Safe Load: 8000 lb (3629 kg) Weight: 6.0 lb (2.7 kg) UPC: 092644479458
Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for permanent anchorage.
