MEGGER MIT410-TC2 1000 VOLT 200 G OHMS INSULATION AND CONTINUITY MEGGER
Available*
Item # 20945550
Model # MIT410-TC2
$743.77
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
MEGGER
Test Equipment
Megger- Insulation- Ground
1000 Volt
Megger Group Limited
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
AVO MEGGER GROUP LIMITED MIT410-TC2 1000 VOLT 200 G OHMS INSULATION AND CONTINUITY MEGGER NEW New from Megger® Insulation and Continuity Testers for the Telcom Industry MIT410-TC and MIT430-TC
Insulation and shield continuity testing- pretesting cable before splicing and after placing. Insulation testing up to 1000 V and 200 G-ohms Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 mA or 20 mA down to 0.01 Pass/Fail limit alarms PI/DAR and Timer function Test result storage (MIT430-TC) Bluetooth® wireless data transfer (MIT430-TC) Three year product warranty IP54 rated
The Megger MIT410-TC and MIT430-TC insulation resistance and continuity testers have been designed specifically for use within the telecommunications industry. In addition to the conventional insulation resistance test, the meters allow the technician to conduct continuity tests throughout the customer's premise. Simply place a shunt strap at the location of the modem, then with the meter go to each outlet to test for continuity using the audible alert feature on the meter to determine correct wiring configurations. This feature would replace the need for a tone generator and amplifier.
The model MIT430-TC offers extensive results storage capability for later recall and Bluetooth download capability for wireless transfer of stored results to a PC. The instruments allow the user to determine the condition of the insulation of the twisted copper cable pair, which could cause problems for services such as voice, video, and data or VOIP. When the insulation becomes weak or brittle, causing cracks or exposing copper within the cable, or water ingresses into the cable, the insulation resistance test will identify these situations immediately.
Insulation and shield continuity testing- pretesting cable before splicing and after placing. Insulation testing up to 1000 V and 200 G-ohms Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 mA or 20 mA down to 0.01 Pass/Fail limit alarms PI/DAR and Timer function Test result storage (MIT430-TC) Bluetooth® wireless data transfer (MIT430-TC) Three year product warranty IP54 rated
The Megger MIT410-TC and MIT430-TC insulation resistance and continuity testers have been designed specifically for use within the telecommunications industry. In addition to the conventional insulation resistance test, the meters allow the technician to conduct continuity tests throughout the customer's premise. Simply place a shunt strap at the location of the modem, then with the meter go to each outlet to test for continuity using the audible alert feature on the meter to determine correct wiring configurations. This feature would replace the need for a tone generator and amplifier.
The model MIT430-TC offers extensive results storage capability for later recall and Bluetooth download capability for wireless transfer of stored results to a PC. The instruments allow the user to determine the condition of the insulation of the twisted copper cable pair, which could cause problems for services such as voice, video, and data or VOIP. When the insulation becomes weak or brittle, causing cracks or exposing copper within the cable, or water ingresses into the cable, the insulation resistance test will identify these situations immediately.
