3M DYNATEL 573 SHEATH/FAULT LOCATOR REPAIRED
Available*
Item # 22600000
Model # 573
$850.00
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
LOCATOR
Test Equipment
Locators Cable Path-Depth
Locators- Path-Sheath Fault
3M
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
3M DYNATEL 573 SHEATH/FAULT LOCATOR REPAIRED Analog meter cable path, depth and sheath fault locator with A-Frame.
The Dynatel 573 precisely locates sheath faults, buried cable paths and measures cable depth, directly or by the traditional triangulation method, to allow for accurate, efficient excavating. The 573 is easy to operate, and requires very little training. The unit consists of three basic components: transmitter with built-in volt/ohmmeter/output level meter , hand-held receiver with color-coded fault-location reference meter and audible cable-location signal and meter indication , earth contact frame-color-coded to correspond with recond with the meter, indicating the direction to the fault, used only when locating sheath faults
RF mode-for precise sheath fault and cable locating over short distances; detects inaudible high-frequency RF tone at 300 kHz; tone is applied by induction using an internal antenna, Dyna-Coupler, or by direct metallic connection.
The unit comes complete with:
3001 Dyna-Coupler 9012 Direct-Connect Transmitter Cable 3014 Earth Contact Frame 9026 Earth Contact Frame Cable 8006 Ground Rod 9011 Coupler Extension Cable
Batteries & Instruction manual
requires 4- 9V batteries 4- 6V screw post
The Dynatel 573 precisely locates sheath faults, buried cable paths and measures cable depth, directly or by the traditional triangulation method, to allow for accurate, efficient excavating. The 573 is easy to operate, and requires very little training. The unit consists of three basic components: transmitter with built-in volt/ohmmeter/output level meter , hand-held receiver with color-coded fault-location reference meter and audible cable-location signal and meter indication , earth contact frame-color-coded to correspond with recond with the meter, indicating the direction to the fault, used only when locating sheath faults
RF mode-for precise sheath fault and cable locating over short distances; detects inaudible high-frequency RF tone at 300 kHz; tone is applied by induction using an internal antenna, Dyna-Coupler, or by direct metallic connection.
The unit comes complete with:
3001 Dyna-Coupler 9012 Direct-Connect Transmitter Cable 3014 Earth Contact Frame 9026 Earth Contact Frame Cable 8006 Ground Rod 9011 Coupler Extension Cable
Batteries & Instruction manual
requires 4- 9V batteries 4- 6V screw post
