RADIO DETECTION 33 kHz S13 SONDE
Available*
Item # 22734000
Model # RD SONDE 33 Khz
$1,011.15
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
LOCATOR
Test Equipment
Locators Cable Path-Depth
Locators- Path-Sheath Fault
Radio Detection - Dielectric Technologies (Mark Products)
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
RADIO DETECTION 33 kHz S13 SONDE NEW S13: a ½” (13mm) diameter sonde for narrow ducts and conduits The S13 Super Small Sonde is designed to be used for tracing the paths of non-metallic pipes, ducts, sewers and drains, and in the precise location of blockages and collapses.
The S13 sonde transmits a locate frequency at 33kHz, making it compatible with most Radiodetection Cable and Pipe locators, including the RD8000 Precision Locator range and the C.A.T4 Cable Avoidance Tool range.
Telecoms industry
With an ever increasing demand for telecommunications, utility companies are increasing the utilization of existing ducts by inserting more and more fibre and metallic cables, resulting in ducts becoming more crowded. The S13 sonde, with a diameter of ½” (12.7mm) is designed to pass through such narrow channels, enabling field technicians to detect and trace their path.
Smaller diameter ducts are often used to install fiber optic cables to homes and businesses. To check for blockages along the duct, the S13 sonde can be jetted or blown through the duct, making the S13 sonde ideal for applications where size restricts the use of larger sondes.
HVAC and water industries
With a diameter of only ½” (12.7 mm), and a short working length of 2.7” (68 mm, with plain end cap), the S13 sonde is designed to pass through narrow pipes and ducts, and can traverse more bends and corners than bigger sonde options. This makes the S13 an ideal tool for tracing non-metallic water pipes, ventilation ducts and drains, both in buildings and buried underground.
Specification
The S13 sonde is supplied as a kit containing the S13 sonde body, an M10 threaded male end cap, plain end cap with eyelet, 2 × batteries and case. An optional pack of 10 batteries is also available.
* performance may vary dependent on local conditions
Part numbers:
S13 kit: 10/S13-33-KIT
Pack of 10 replacement batteries: 10/S13-BATTERYPACK
Radiodetection accessory range
Radiodetection supplies a comprehensive range of sondes and accessories, including flexible rods to insert and push the sonde along pipes. Each sonde varies in diameter and in the depth to which the signal can be located. All the sondes are compatible with a wide range of Radiodetection locators.
The S13 sonde transmits a locate frequency at 33kHz, making it compatible with most Radiodetection Cable and Pipe locators, including the RD8000 Precision Locator range and the C.A.T4 Cable Avoidance Tool range.
Telecoms industry
With an ever increasing demand for telecommunications, utility companies are increasing the utilization of existing ducts by inserting more and more fibre and metallic cables, resulting in ducts becoming more crowded. The S13 sonde, with a diameter of ½” (12.7mm) is designed to pass through such narrow channels, enabling field technicians to detect and trace their path.
Smaller diameter ducts are often used to install fiber optic cables to homes and businesses. To check for blockages along the duct, the S13 sonde can be jetted or blown through the duct, making the S13 sonde ideal for applications where size restricts the use of larger sondes.
HVAC and water industries
With a diameter of only ½” (12.7 mm), and a short working length of 2.7” (68 mm, with plain end cap), the S13 sonde is designed to pass through narrow pipes and ducts, and can traverse more bends and corners than bigger sonde options. This makes the S13 an ideal tool for tracing non-metallic water pipes, ventilation ducts and drains, both in buildings and buried underground.
Specification
The S13 sonde is supplied as a kit containing the S13 sonde body, an M10 threaded male end cap, plain end cap with eyelet, 2 × batteries and case. An optional pack of 10 batteries is also available.
* performance may vary dependent on local conditions
Part numbers:
S13 kit: 10/S13-33-KIT
Pack of 10 replacement batteries: 10/S13-BATTERYPACK
Radiodetection accessory range
Radiodetection supplies a comprehensive range of sondes and accessories, including flexible rods to insert and push the sonde along pipes. Each sonde varies in diameter and in the depth to which the signal can be located. All the sondes are compatible with a wide range of Radiodetection locators.
