DCD 35100-003 Tube-lube Applicator - Single Steel Tank 3-1/2 Gallon
Available*
Item # 30509178
Model # 35100-003
$597.08
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
LUBRICANT
Material and Supplies
Lubricants-Sealants
Lubricant- Greases
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD 35100-003 Tube-lube Applicator - Single Steel Tank 3-1/2 Gallon
DCD 35100-003 Tube-lube Applicator - Single Steel Tank 3-1/2 Gallon
Part # 35100-003 Description Tube-lube Manual Applicator Single Steel Tank 3-1/2 Gallon Weight 20.0 lb
Manual Applicator Kit A manually pressurized spray tank with a pressure gauge allows the user to monitor the amount of lube being sprayed onto the cable via the included hand-held wand, or any of DCD’s products fitted with a quick connect spray nozzle. Different pressures allow different volumes. A manual shut-off valve leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away.
DCD 35100-003 Tube-lube Applicator - Single Steel Tank 3-1/2 Gallon
Part # 35100-003 Description Tube-lube Manual Applicator Single Steel Tank 3-1/2 Gallon Weight 20.0 lb
Manual Applicator Kit A manually pressurized spray tank with a pressure gauge allows the user to monitor the amount of lube being sprayed onto the cable via the included hand-held wand, or any of DCD’s products fitted with a quick connect spray nozzle. Different pressures allow different volumes. A manual shut-off valve leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away.
