DCD 24300-500 Multiplex Pulling Eye 500 Mcm Lug Style
Available*
Item # 30512390
Model # 24300-500
$512.93
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
PULL EYES
Tools
Line Construction- Placing
Eyes- Cable Pulling
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD DESIGN/CABLE SPINNING EQUIPMENT 24300-500 Multiplex Pulling Eye 500 Mcm Lug Style NEW
This stainless steel product is designed to pull either triplex or quadplex cables. The 4 holes are sized for the cable conductors and each hole has three setscrews to clamp down on the cable. Each product is also supplied with 3 spare set screws and a hex key. Care needs to be taken pulling around bends or sheaves because there will be extra heavy load on the cables on the outside of the bend and this may cause them to pull loose from their clamped position in the pulling eye. Use mainly for short, straight pulls.
This stainless steel product is designed to pull either triplex or quadplex cables. The 4 holes are sized for the cable conductors and each hole has three setscrews to clamp down on the cable. Each product is also supplied with 3 spare set screws and a hex key. Care needs to be taken pulling around bends or sheaves because there will be extra heavy load on the cables on the outside of the bend and this may cause them to pull loose from their clamped position in the pulling eye. Use mainly for short, straight pulls.
