DCD 61800-000 FALCON CABLE LASHER
Available*
Item # 30785100
Model # 61800-000
$6,541.07
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
LASHERS
Tools
Line Construction- Placing
Lashers- Spinners
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD 61800-000 FALCON CABLE LASHER NEW
General Information: The DCD Falcon Lasher is a lightweight lasher that was designed to lash cables or up to 3-1/4¡¨ diameter. It weighs just 21 pounds and does not need traction from the supporting strand to drive the lasher making it very beneficial to use when overlashing existing cables. This lasher is a piece of precision equipment. Treat is as such. Keep the lasher, operating manual and accessories in the protective storage case after use. This measure will prolong the useful life of your lasher.
Specifications: Lasher Weight: 21 lbs. Shipping Weight: 45 lbs. (Including Carry Case) Lasher Dimensions: 19.5¡¨ long x 10-5/8¡¨ wide x 9-1/4¡¨ high
Capacity: Single cable 3-1/4 INCHES OD maximum Multiple Cables not to exceed 3-1/2 INCHES OD as a bundle Capabilities: The Falcon Lasher will single or double lash without strand traction. It is compatible with standard size coils of .045¡¨ and .038¡¨ lashing wire, metallic or non-metallic. Depending on bundle size, double lashing provides a support approximately every 6¡¨, while single lashing provides a support approximately every 12¡¨. It is also equipped with a clutch handle to allow easy mounting and passing the unit around a pole without cutting the lashing wire or removing it from the drive wheels.
General Information: The DCD Falcon Lasher is a lightweight lasher that was designed to lash cables or up to 3-1/4¡¨ diameter. It weighs just 21 pounds and does not need traction from the supporting strand to drive the lasher making it very beneficial to use when overlashing existing cables. This lasher is a piece of precision equipment. Treat is as such. Keep the lasher, operating manual and accessories in the protective storage case after use. This measure will prolong the useful life of your lasher.
Falcon Lasher The Falcon Lasher is a completely redesigned lasher, incorporating design elements of our previous Eagle, Lineman and Model K lashers, as well as new design concepts that simplify the lasher to make it more robust and lower maintenance.
This new lasher will single or double lash without strand traction. It is also equipped with a clutch handle to allow easy mounting and passing the unit around a pole without cutting the lashing wire or removing it from the drive wheels.
The capacity has been expanded beyond the Lineman™ Lasher and the use of innovative, modern engineering materials makes it lightweight and practical for smaller jobs previously done by the Eagle Lasher.
Weighing in at 20 lb, the Falcon Lasher is lighter than even smaller capacity lashers on the market. Compared to lashers of similar capacity, it weighs less than half the weight of typical lashers.
Magazine style doors provide easy loading of metallic or non-metallic lashing wire. Front and rear rollers made from Delrin allow smooth passage of cable and also protect your cable from damage. A simplified rear gate design with quick release mechanisms allows for efficient adjustment of the rear roller.
We are so confident in our new design that we are extending the DCD Limited Warranty Policy from 6 months to 12 months for this product.
Part No. 61800-000 Maximum Strand 1/2" Maximum Lash 3-1/2" diameter Wire Size 0.038" to 0.061" Spool Size 1,200' per coil Overall Dimensions 20" L x 11" W x 10" H Weight 21.3 lb
shipping weight 46 lbs shipping dimensions 24x20x12
General Information: The DCD Falcon Lasher is a lightweight lasher that was designed to lash cables or up to 3-1/4¡¨ diameter. It weighs just 21 pounds and does not need traction from the supporting strand to drive the lasher making it very beneficial to use when overlashing existing cables. This lasher is a piece of precision equipment. Treat is as such. Keep the lasher, operating manual and accessories in the protective storage case after use. This measure will prolong the useful life of your lasher.
Specifications: Lasher Weight: 21 lbs. Shipping Weight: 45 lbs. (Including Carry Case) Lasher Dimensions: 19.5¡¨ long x 10-5/8¡¨ wide x 9-1/4¡¨ high
Capacity: Single cable 3-1/4 INCHES OD maximum Multiple Cables not to exceed 3-1/2 INCHES OD as a bundle Capabilities: The Falcon Lasher will single or double lash without strand traction. It is compatible with standard size coils of .045¡¨ and .038¡¨ lashing wire, metallic or non-metallic. Depending on bundle size, double lashing provides a support approximately every 6¡¨, while single lashing provides a support approximately every 12¡¨. It is also equipped with a clutch handle to allow easy mounting and passing the unit around a pole without cutting the lashing wire or removing it from the drive wheels.
General Information: The DCD Falcon Lasher is a lightweight lasher that was designed to lash cables or up to 3-1/4¡¨ diameter. It weighs just 21 pounds and does not need traction from the supporting strand to drive the lasher making it very beneficial to use when overlashing existing cables. This lasher is a piece of precision equipment. Treat is as such. Keep the lasher, operating manual and accessories in the protective storage case after use. This measure will prolong the useful life of your lasher.
Falcon Lasher The Falcon Lasher is a completely redesigned lasher, incorporating design elements of our previous Eagle, Lineman and Model K lashers, as well as new design concepts that simplify the lasher to make it more robust and lower maintenance.
This new lasher will single or double lash without strand traction. It is also equipped with a clutch handle to allow easy mounting and passing the unit around a pole without cutting the lashing wire or removing it from the drive wheels.
The capacity has been expanded beyond the Lineman™ Lasher and the use of innovative, modern engineering materials makes it lightweight and practical for smaller jobs previously done by the Eagle Lasher.
Weighing in at 20 lb, the Falcon Lasher is lighter than even smaller capacity lashers on the market. Compared to lashers of similar capacity, it weighs less than half the weight of typical lashers.
Magazine style doors provide easy loading of metallic or non-metallic lashing wire. Front and rear rollers made from Delrin allow smooth passage of cable and also protect your cable from damage. A simplified rear gate design with quick release mechanisms allows for efficient adjustment of the rear roller.
We are so confident in our new design that we are extending the DCD Limited Warranty Policy from 6 months to 12 months for this product.
Part No. 61800-000 Maximum Strand 1/2" Maximum Lash 3-1/2" diameter Wire Size 0.038" to 0.061" Spool Size 1,200' per coil Overall Dimensions 20" L x 11" W x 10" H Weight 21.3 lb
shipping weight 46 lbs shipping dimensions 24x20x12
