GMP 80920 UMBRELLA D 68 inch DIAMETER W/72 inch POLE
Available*
Item # 37990000
Model # 80920
$274.78
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
UMBRELLAS
Tools
Tents- Umbrellas-- Canvases
Umbrellas and Accessories
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 80920 UMBRELLA D W/72" POLE NEW Whether you're working in a bucket or on the ground, GENERAL MACHINE PRODUCTS sunshades give you fast shelter from the sun. GENERAL MACHINE PRODUCTS offers a choice of rugged umbrellas and a complete line of accessories that provide maximum mounting and angle-adjustment flexibility.
Choose between our Model D Umbrella for standard use or our Dielectric Umbrella to reduce the potential of electrical shock when working near power wires. To make your umbrella even more useful, our optional Umbrella Angle Adapter (P/N 71572) provides five tilt-angle adjustment settings for maximum protection no matter where the sun is located. This adapter can be offered with a One-Piece 24 in. (609.6 mm) Pole Extension (P/N 71647) or with a Two-Piece Pole Extension set (P/N 71640), giving you a full 45 inches (1.125 M) of pole length.
For protection while working at ground level, we offer a sturdy Tripod Umbrella Kit (P/N 71649) that features weighted-leg construction. The kit comes complete with a durable storage bag.
For weather protection while working aloft, a convenient Bucket Holder (P/N 28210) pole attachment is available for securely mounting your umbrella to any flat bucket surface (requires P/N 71647 Angle Adapter with one-piece pole extension). Bucket Holder thumb screws make precise umbrella positioning a snap. All accessories accommodate GENERAL MACHINE PRODUCTS manufactured umbrellas.
A tough plastic 68 in. (173 cm) dia. umbrella cover is colored safety yellow on the top (custom company logos available)
A reflective white underside cuts down on interior heat absorption and is vinyl-coated; nylon rib-end pockets keep the frame from tearing the cover
Self-sealing waterproofed, waxed stitching and improved construction, using a nylon sleeve and rib retainers for attaching the frame's six collapsible ribs
The frame's collapsible fiberglass ribs connect at a ring-type lock that slides along the pole as you open or close the umbrella
To lock the ring, just slide it over the set pin in the pole, and rotate it
The 43 in. (109 cm) long wooden pole has a male ferrule so you can attach the 29 in. (74 cm) extension section for a height of 6 ft. (1.83 m)
When working near power wires choose the dielectric umbrella to reduce potential sources of electrical shock (see O.S.H.A. statement)
44 x 5 x 5 9lbs
Choose between our Model D Umbrella for standard use or our Dielectric Umbrella to reduce the potential of electrical shock when working near power wires. To make your umbrella even more useful, our optional Umbrella Angle Adapter (P/N 71572) provides five tilt-angle adjustment settings for maximum protection no matter where the sun is located. This adapter can be offered with a One-Piece 24 in. (609.6 mm) Pole Extension (P/N 71647) or with a Two-Piece Pole Extension set (P/N 71640), giving you a full 45 inches (1.125 M) of pole length.
For protection while working at ground level, we offer a sturdy Tripod Umbrella Kit (P/N 71649) that features weighted-leg construction. The kit comes complete with a durable storage bag.
For weather protection while working aloft, a convenient Bucket Holder (P/N 28210) pole attachment is available for securely mounting your umbrella to any flat bucket surface (requires P/N 71647 Angle Adapter with one-piece pole extension). Bucket Holder thumb screws make precise umbrella positioning a snap. All accessories accommodate GENERAL MACHINE PRODUCTS manufactured umbrellas.
A tough plastic 68 in. (173 cm) dia. umbrella cover is colored safety yellow on the top (custom company logos available)
A reflective white underside cuts down on interior heat absorption and is vinyl-coated; nylon rib-end pockets keep the frame from tearing the cover
Self-sealing waterproofed, waxed stitching and improved construction, using a nylon sleeve and rib retainers for attaching the frame's six collapsible ribs
The frame's collapsible fiberglass ribs connect at a ring-type lock that slides along the pole as you open or close the umbrella
To lock the ring, just slide it over the set pin in the pole, and rotate it
The 43 in. (109 cm) long wooden pole has a male ferrule so you can attach the 29 in. (74 cm) extension section for a height of 6 ft. (1.83 m)
When working near power wires choose the dielectric umbrella to reduce potential sources of electrical shock (see O.S.H.A. statement)
44 x 5 x 5 9lbs
