900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
Available*
Item # 55327100
Model # 900x24GA PE89
$28,674.00
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CABLE
Wire and Cable
Filled- Flooded-Jelly
Sheilded
Superior Essex Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
Application: PE-89 Outside Plant Telephone Cable is primarily used for either exchange area or trunk service installed in duct or directly buried.
Conductors: Solid soft drawn bare copper conductor.
Insulation: Expanded polyethylene (Foam Skin) with an external layer of solid, high-density polyethylene insulation, with a distinctive color code, which conforms to telephone industry standards. The conductors are twisted in pairs and then cabled together to be round. The core is filled with an ETPR compound.
Inner Jacket: Black polyethylene inner jacket.
Shield: Corrugated 8-mil thick aluminum tape shield applied longitudinally over the inner jacket.
Outer Jacket: Black, linear, low-density, high molecular weight polyethylene jacket.
Standards: Meets requirements of REA/RUS PE-89 ANSI/ICEA S-84-608 ASTM B3, B258
900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
900PR 24AWG PE89 CABLE REEL OF 1000 FEET NEW
Application: PE-89 Outside Plant Telephone Cable is primarily used for either exchange area or trunk service installed in duct or directly buried.
Conductors: Solid soft drawn bare copper conductor.
Insulation: Expanded polyethylene (Foam Skin) with an external layer of solid, high-density polyethylene insulation, with a distinctive color code, which conforms to telephone industry standards. The conductors are twisted in pairs and then cabled together to be round. The core is filled with an ETPR compound.
Inner Jacket: Black polyethylene inner jacket.
Shield: Corrugated 8-mil thick aluminum tape shield applied longitudinally over the inner jacket.
Outer Jacket: Black, linear, low-density, high molecular weight polyethylene jacket.
Standards: Meets requirements of REA/RUS PE-89 ANSI/ICEA S-84-608 ASTM B3, B258
