POLYWATER FST-MINI-1G FST™ Mini Foam Duct Sealant (single kit with tool) 02786804583 SOLD PER EACH
Available*
Item # 55461690
Model # FST-MINI-1G
$98.72
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
DUCT SEAL
Material and Supplies
Duct- Conduit
Adhesive
Polywater
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
AMERICAN POLYWATER FST-MINI-1G FST™ Mini Foam Duct Sealant (single kit with tool) 02786804583 SOLD PER EACH AMERICAN AMERICAN POLYWATER FST-MINI-1G FST™ Mini Foam Duct Sealant (single kit with tool) 02786804583 SOLD PER EACH
Includes the following:
1 50-mL cartridge
2 Mixing nozzles
6 Foam discs
2 Pair of disposable gloves
1 Instruction sheet
1 TOOL-50-11
AMERICAN AMERICAN POLYWATER ® FST Duct Sealant
Water Block Foam Kit
A Multi-Use, Quick-Setting Two-Part, Foam-Base Duct-Sealing System
Seal water, dirt, oil, gases, rodents, or other contaminants out of conduit/duct or central office
Protect your investment in cable, electronics
Deter copper cable thieves
Cured foam is strong, resilient and chemically resistant
Provides superior protection in adverse field conditions and where cable movement is present
Can hold 22 feet water-head pressure over an extended period of time
Will tolerate cable movement
Foam expands and cures quickly even when water is present
Seal ducts quickly and neatly
Two-part foam is mixed in nozzle as it is injected -- no mixing required
Saves time with no measuring
Packages are resealable, no waste
Cured foam is semi-permanent and can be removed
No known effects on common cable and wire jacketing compounds.
FST™ Duct Seal is a “closed cell foam”, which is superior to “open cell” spray canned foams. The kit contains a cartridge filled with a two-part foam base, which is mixed in equal parts as it is pushed through a mixing nozzle. When mixed and injected, the foam expands and hardens, keeping water, acids, greases, gases, insects, and rodents, etc., out of the conduit. The foam has good wetting and adhesion to metals, plastics, and concrete. A separate, reusable ratchet application tool is used to inject the foam. AMERICAN POLYWATER ® Duct Sealant & Water Block Foam Kit -- Seals Water and Contaminants Out of Conduits and Ducts. Protects Cables and Deters Copper Thieves. Strong, Resilient, Chemically Resistant. Cures Quickly. FST-MINI is used for 1.5-inch (38mm) and smaller conduits. It comes in a dual 50 ml cartridge with 1:1 ratio. TOOL-50-11 is needed to apply FST-MINI. FST™ foam wets and adheres to metals, plastics, and concrete, and can seal ducts of different sizes, base materials, and shapes. It conforms around complex cable fill configurations. A kit contains everything required to install the duct block (application tools available separately).
KiContains:
50-mL cartridge 1 Mixing Nozzles 2 Foam Discs 6 Pair of disposable gloves 2 Instruction Sheet 1 TOOL-50-11
AMERICAN AMERICAN POLYWATER ® FST Duct Sealant
Water Block Foam Kit
A Multi-Use, Quick-Setting Two-Part, Foam-Base Duct-Sealing System
Seal water, dirt, oil, gases, rodents, or other contaminants out of conduit/duct or central office
Protect your investment in cable, electronics
Deter copper cable thieves
Cured foam is strong, resilient and chemically resistant
Provides superior protection in adverse field conditions and where cable movement is present
Can hold 22 feet water-head pressure over an extended period of time
Will tolerate cable movement
Foam expands and cures quickly even when water is present
Seal ducts quickly and neatly
Two-part foam is mixed in nozzle as it is injected -- no mixing required
Saves time with no measuring
Packages are resealable, no waste
Cured foam is semi-permanent and can be removed
No known effects on common cable and wire jacketing compounds.
FST™ Duct Seal is a “closed cell foam”, which is superior to “open cell” spray canned foams. The kit contains a cartridge filled with a two-part foam base, which is mixed in equal parts as it is pushed through a mixing nozzle. When mixed and injected, the foam expands and hardens, keeping water, acids, greases, gases, insects, and rodents, etc., out of the conduit. The foam has good wetting and adhesion to metals, plastics, and concrete. A separate, reusable ratchet application tool is used to inject the foam. AMERICAN POLYWATER ® Duct Sealant & Water Block Foam Kit -- Seals Water and Contaminants Out of Conduits and Ducts. Protects Cables and Deters Copper Thieves. Strong, Resilient, Chemically Resistant. Cures Quickly. FST-MINI is used for 1.5-inch (38mm) and smaller conduits. It comes in a dual 50 ml cartridge with 1:1 ratio. TOOL-50-11 is needed to apply FST-MINI. FST™ foam wets and adheres to metals, plastics, and concrete, and can seal ducts of different sizes, base materials, and shapes. It conforms around complex cable fill configurations. A kit contains everything required to install the duct block (application tools available separately).
KiContains:
50-mL cartridge 1 Mixing Nozzles 2 Foam Discs 6 Pair of disposable gloves 2 Instruction Sheet 1 TOOL-50-11
