ARNCO 41700292500 FIGURE 8 1.25 INCH HDPE SIDR9, 1/4 INCH STRAND, TAPED BLACK PER 1000 FEET
Available*
Item # 55654000
Model # 41700292500
$1,946.70
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CONDUIT
Material and Supplies
Duct- Conduit
Conduit
Arnco Corporation
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
ARNCO 41700292500 FIGURE 8 1.25 INCH HDPE SIDR9, 1/4 INCH STRAND, TAPED BLACK PER 1000 FEET NEW 41700292500 Duct, HDPE, 1.25", Figure 8, SIDR9, ¼" strand, tape, BLACK
STRAND-GUARD® SOLID WALL Specialty Conduit FIGURE 8 AERIAL CONDUIT FIGURE 8 CONDUIT Features & Benefits "Figure 8" construction with extra high strength (EHS), flooded galvanized support strand for one-step aerial placement. Duct sizes 1-1/4" (32mm) and 2" (51mm) HDPE duct has carbon black and antioxidants for maximum UV and thermal protection. Available with coextruded Silicore permanent lining. Fits standard serpentine clamp. Sequential markings in feet or meters. Figure 8 Solid Wall Aerial Duct GENERAL INFORMATION Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.
Breaking Pull Strength*: 6,650 lbs * Point at which strand failure may occur. Strand Class A Flooded: 1/4" EHS galv. Solid wall duct available on steel reels. SIZE–STRAND TYPE FIGURE 8 Standard Shipping 1-1/4" FIGURE 8 Standard lengths: 2,500' and 5,000' Typical Span Lengths 1/4" EHS galv. 225' (67 meters) Material Designation HDPE with cell classification of 335430C per ASTM D-3350. Type III, Category 5, Class B or C, Grade P34 per ASTM D-1248. Aerial duct with integral strand for placing between poles
price is per 1000', but you have to purchase in 2,500' lengths.
STRAND-GUARD® SOLID WALL Specialty Conduit FIGURE 8 AERIAL CONDUIT FIGURE 8 CONDUIT Features & Benefits "Figure 8" construction with extra high strength (EHS), flooded galvanized support strand for one-step aerial placement. Duct sizes 1-1/4" (32mm) and 2" (51mm) HDPE duct has carbon black and antioxidants for maximum UV and thermal protection. Available with coextruded Silicore permanent lining. Fits standard serpentine clamp. Sequential markings in feet or meters. Figure 8 Solid Wall Aerial Duct GENERAL INFORMATION Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.
Breaking Pull Strength*: 6,650 lbs * Point at which strand failure may occur. Strand Class A Flooded: 1/4" EHS galv. Solid wall duct available on steel reels. SIZE–STRAND TYPE FIGURE 8 Standard Shipping 1-1/4" FIGURE 8 Standard lengths: 2,500' and 5,000' Typical Span Lengths 1/4" EHS galv. 225' (67 meters) Material Designation HDPE with cell classification of 335430C per ASTM D-3350. Type III, Category 5, Class B or C, Grade P34 per ASTM D-1248. Aerial duct with integral strand for placing between poles
price is per 1000', but you have to purchase in 2,500' lengths.
