Klein 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971 New
Available*
Item # 82000296
Model # 1716-70
$664.02
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Grips
Tools
Line Construction- Placing
Grips- Strand- Lashing Wire
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Klein 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971 New
Klein 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971 New
P/N 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971
Securely Pulls Hdpe-Coated Cable Commonly Known As Tree Wire Innovative High-Traction Surface Grips The Cable Without Damaging The Outer Jacket Pulls Cable Diameters 0.625-Inch To 1.362-Inch (15.875 To 34.595 Mm) With Max Safe Load: 4000-Pound (1814 Kg) Tough Carbide Grit Technology Withstands Even The Harshest Jobsite Conditions Made In Usa Spring-Loaded For One-Handed Operation And Easy Placement On The Conductor Common Tree Wire Cable Types Include General Cable, Hendrix® Aerial Systems, Rite Lite Bll Conductor And Southwire® S2 Covered Cable Hendrix® Is A Registered Trademark Of Marmon Utility, Llc Southwire® Is A Registered Trademark Of Southwire Company, Llc
This Parallel Jaw Grip Was Specifically Designed To Securely Pull Slippery Hdpe-Coated Cable Or Tree Wire. The Innovative High-Traction Surface Grips The Cable Without Damaging The Outer Jacket. The Tough Carbide Grit Technology Withstands Even The Harshest Jobsite Conditions. The Grip Is Spring-Loaded For One-Handed Operation And Easy Placement On The Conductor.
Specifications Type: Parallel Jaw Grip Application: Wide Range Cable Pulling Grip Special Features: High Traction Grip Surface Overall Length: 12.5'' (31.8 Cm) Overall Height: 8.5'' (21.6 Cm) Overall Width: 2.75'' (7 Cm) Material: Forged Steel Cable Type: Hdpe-Coated Cable Diameter: 0.625'' To 1.362'' (15.9 To 34.6 Mm) Hot Latch: Y Swing Latch: N Spring: Y Locking Handle: N Jaw Length: 4.5'' (11.4 Cm) Jaw Type: Round Maximum Safe Load: 4000 Lb (1814 Kg) Standard: Osha Weight: 5.10 Lb (2.31 Kg) Upc: 092644471971
Warnings Before Each Use, Clean Jaw Area And Inspect Grip For Proper Operation To Avoid Slippage. When Used On/Near Energized Lines, Ground, Insulate, Or Isolate Grip Before Pulling. Do Not Exceed Rated Capacity. Always Match Proper Size And Type Of Grip To Application.
Klein 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971 New
P/N 1716-70 Parallel Jaw Grip, Hdpe Wire To 1.362-Inch Upc 092644471971
Securely Pulls Hdpe-Coated Cable Commonly Known As Tree Wire Innovative High-Traction Surface Grips The Cable Without Damaging The Outer Jacket Pulls Cable Diameters 0.625-Inch To 1.362-Inch (15.875 To 34.595 Mm) With Max Safe Load: 4000-Pound (1814 Kg) Tough Carbide Grit Technology Withstands Even The Harshest Jobsite Conditions Made In Usa Spring-Loaded For One-Handed Operation And Easy Placement On The Conductor Common Tree Wire Cable Types Include General Cable, Hendrix® Aerial Systems, Rite Lite Bll Conductor And Southwire® S2 Covered Cable Hendrix® Is A Registered Trademark Of Marmon Utility, Llc Southwire® Is A Registered Trademark Of Southwire Company, Llc
This Parallel Jaw Grip Was Specifically Designed To Securely Pull Slippery Hdpe-Coated Cable Or Tree Wire. The Innovative High-Traction Surface Grips The Cable Without Damaging The Outer Jacket. The Tough Carbide Grit Technology Withstands Even The Harshest Jobsite Conditions. The Grip Is Spring-Loaded For One-Handed Operation And Easy Placement On The Conductor.
Specifications Type: Parallel Jaw Grip Application: Wide Range Cable Pulling Grip Special Features: High Traction Grip Surface Overall Length: 12.5'' (31.8 Cm) Overall Height: 8.5'' (21.6 Cm) Overall Width: 2.75'' (7 Cm) Material: Forged Steel Cable Type: Hdpe-Coated Cable Diameter: 0.625'' To 1.362'' (15.9 To 34.6 Mm) Hot Latch: Y Swing Latch: N Spring: Y Locking Handle: N Jaw Length: 4.5'' (11.4 Cm) Jaw Type: Round Maximum Safe Load: 4000 Lb (1814 Kg) Standard: Osha Weight: 5.10 Lb (2.31 Kg) Upc: 092644471971
Warnings Before Each Use, Clean Jaw Area And Inspect Grip For Proper Operation To Avoid Slippage. When Used On/Near Energized Lines, Ground, Insulate, Or Isolate Grip Before Pulling. Do Not Exceed Rated Capacity. Always Match Proper Size And Type Of Grip To Application.
