KLEIN 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch 092644470653 NEW
Available*
Item # 82000298
Model # 1716-71
$671.98
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
GRIPS
Tools
Line Construction- Placing
Grips- Strand- Lashing Wire
Klein Tools
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
KLEIN 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch 092644470653 NEW
KLEIN 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch 092644470653 NEW
P/N 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch UPC 092644470653
Securely pulls HDPE-coated cable commonly known as tree wire Innovative high-traction surface grips the cable without damaging the outer jacket Locking handle keeps jaw open while using hot stick to place grip on cable Pulls cable diameters 0.625-Inch to 1.362-Inches (15.9 to 35.0 mm) 4,000-Pound (1814 kg) maximum safe load Tough carbide grit technology withstands even the harshest jobsite conditions Spring-loaded for one-handed operation and easy placement on the conductor Common tree wire cable types include general cable, Hendrix® aerial systems, rite lite BLL conductor and Southwire® S2 covered cable Hendrix® is a registered trademark of Marmon Utility, LLC Southwire® is a registered trademark of Southwire Company, LLC
Specifications Type: Parallel Jaw Grip Application: Wire Pulling Special Features: High Traction Grip Surface, Lock Overall Length: 13.05'' (17.7 cm) Overall Height: 8.5'' (21.6 cm) Overall Width: 6.975'' (7 cm) Material: Forged Steel Cable Type: HDPE-Coated Cable Diameter: 0.625'' to 1.362'' (15.9 to 34.6 mm) Hot Latch: Y Swing Latch: N Spring: Y Locking Handle: Y Jaw Type: Round Jaw Length: 4.5'' (11.4 cm) Maximum Safe Load: 4000 lb (1814 kg) Standard: OSHA Weight: 5.10 lb (2.3 kg) UPC: 092644470653
Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application.
KLEIN 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch 092644470653 NEW
P/N 1716-71 Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch UPC 092644470653
Securely pulls HDPE-coated cable commonly known as tree wire Innovative high-traction surface grips the cable without damaging the outer jacket Locking handle keeps jaw open while using hot stick to place grip on cable Pulls cable diameters 0.625-Inch to 1.362-Inches (15.9 to 35.0 mm) 4,000-Pound (1814 kg) maximum safe load Tough carbide grit technology withstands even the harshest jobsite conditions Spring-loaded for one-handed operation and easy placement on the conductor Common tree wire cable types include general cable, Hendrix® aerial systems, rite lite BLL conductor and Southwire® S2 covered cable Hendrix® is a registered trademark of Marmon Utility, LLC Southwire® is a registered trademark of Southwire Company, LLC
Specifications Type: Parallel Jaw Grip Application: Wire Pulling Special Features: High Traction Grip Surface, Lock Overall Length: 13.05'' (17.7 cm) Overall Height: 8.5'' (21.6 cm) Overall Width: 6.975'' (7 cm) Material: Forged Steel Cable Type: HDPE-Coated Cable Diameter: 0.625'' to 1.362'' (15.9 to 34.6 mm) Hot Latch: Y Swing Latch: N Spring: Y Locking Handle: Y Jaw Type: Round Jaw Length: 4.5'' (11.4 cm) Maximum Safe Load: 4000 lb (1814 kg) Standard: OSHA Weight: 5.10 lb (2.3 kg) UPC: 092644470653
Warnings Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application.
