GMP General Machine Products 71472 42 inches 1000 lbs Mid-Assist Fiber Optic Capstan
Available*
Item # 31006140
Model # 71472
$8,446.99
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CAPSTANS
Tools
Line Construction- Placing
Capstans
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP General Machine Products 71472 42 inches 1000 lbs Mid-Assist Fiber Optic Capstan
GMP General Machine Products 71472 42 inches 1000 lbs Mid-Assist Fiber Optic Capstan
P/N 71472 Mid-Assist Fiber Optic Capstan
Working Diameter 42 inches (1067 mm) Working Width 7.5 inches (190 mm) Pull 1000 lbs.-force (4448 Newtos) Weight 130 lbs, (58.97)
MID-ASSIST FIBER OPTIC CAPSTAN with SLIP CLUTCH GMP offers you a choice of several lightweight aluminum alloy units that mount on a standard 2 7/16 in. (62mm) diameter drive shaft with either a bayonet or a cross pin type of connection.
These capstans can be used as end pullers or mid-assist booster pullers that will allow long, straight-through, splice-free pulls
Offered with a torque limiter between the drive spindle and the inner hub, factory set at standard 600 pounds-force (2669 N-force), but maybe calibrated to other torque values if requested
Also available with a steel shaft and no torque limiter for no-slip applications with a maximum rated load of 1500 lbs. (6672 N)*
Can also be used with Fiber Optic Cable Blowers to place longer lengths of cable without splicing
GMP General Machine Products 71472 42 inches 1000 lbs Mid-Assist Fiber Optic Capstan
P/N 71472 Mid-Assist Fiber Optic Capstan
Working Diameter 42 inches (1067 mm) Working Width 7.5 inches (190 mm) Pull 1000 lbs.-force (4448 Newtos) Weight 130 lbs, (58.97)
MID-ASSIST FIBER OPTIC CAPSTAN with SLIP CLUTCH GMP offers you a choice of several lightweight aluminum alloy units that mount on a standard 2 7/16 in. (62mm) diameter drive shaft with either a bayonet or a cross pin type of connection.
These capstans can be used as end pullers or mid-assist booster pullers that will allow long, straight-through, splice-free pulls
Offered with a torque limiter between the drive spindle and the inner hub, factory set at standard 600 pounds-force (2669 N-force), but maybe calibrated to other torque values if requested
Also available with a steel shaft and no torque limiter for no-slip applications with a maximum rated load of 1500 lbs. (6672 N)*
Can also be used with Fiber Optic Cable Blowers to place longer lengths of cable without splicing
