3M 4627S PULL N SHRINK TUBING PST (0.412) 80610100077
Available*
Item # 55945100
Model # 80610100077
$11.33
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CLOSURE
Material and Supplies
Closures
Closures Pedestal Style
3M
Pedestal Parts and Accessories
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
3M 4627S PULL N SHRINK TUBING PST (0.412) 80610100077 NEW
3M 4627S PULL N SHRINK TUBING PST (0.412) 80610100077 NEW
3M ID 80-6101-0007-7 UPC 00054007329794 051138-32979
Pull ‘N’ Shrink Tubing (Cold Shrink) is an open-ended tubular rubber sleeve (of high stretch EPDM rubber) which has been factory expanded and assembled into a removable hollow core. To use, the core mounted tubing is correctly positioned over a coaxial cable connector and then shrunk in place by pulling out the specially designed core allowing elastic recovery of the tube. This results in protection of the connector from the ambient environment by the rubber sleeve. The Pull ‘N’ Shrink Tubing is available in 6 sizes covering coaxial cable diameter range from 6.9 mm (0.27") to a maximum of 45.7 mm (1.80"). Each size is available in two lengths - the long (L) version is designed for splice connector protection and the short (S) is for use with connections to taps, amplifiers and splitters.
3M 4627S PULL N SHRINK TUBING PST (0.412) 80610100077 NEW
3M ID 80-6101-0007-7 UPC 00054007329794 051138-32979
Pull ‘N’ Shrink Tubing (Cold Shrink) is an open-ended tubular rubber sleeve (of high stretch EPDM rubber) which has been factory expanded and assembled into a removable hollow core. To use, the core mounted tubing is correctly positioned over a coaxial cable connector and then shrunk in place by pulling out the specially designed core allowing elastic recovery of the tube. This results in protection of the connector from the ambient environment by the rubber sleeve. The Pull ‘N’ Shrink Tubing is available in 6 sizes covering coaxial cable diameter range from 6.9 mm (0.27") to a maximum of 45.7 mm (1.80"). Each size is available in two lengths - the long (L) version is designed for splice connector protection and the short (S) is for use with connections to taps, amplifiers and splitters.
