3M 4634 PST PED CLOSURE PED CAP
Available*
Item # 55945125
Model # 4634
$42.63
financing available. Learn More
* Notes on Availability:
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
CLOSURE
Material and Supplies
Closures
Closures Pedestal Style
3M
Pedestal Parts and Accessories
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
3M 4634 PST CLOSURE KIT
PST (Pull 'N' Shrink Tubing) Pedestal Splice Closures and Reentry Kits give ultimate protection to splices. The kits provide protection from the harmful effects of moisture and ultraviolet light, as well as increased security from vandalism. The pedestal splice closure forms a reusable closure body around the copper network–without requiring special tools or flame for installation. The splice is enclosed in a polyethylene dome, and then an ethylene propylene tube (PST) is slipped over the enclosure joint and onto a sealing collar. Pulling a plastic rip cord on the PST allows it to shrink back to the minimum outside diameter necessary to form a tight seal. The flexible tubing material conforms to the shape of the joint, sealing out both air and water. The kit is available in five sizes from 3 inches to 8 inches in diameter to fit a full range of above ground pedestals
2.8 W x 2.5 D x 18 H INCHES APPROXIMATELY 100 PR MS2 OR 50 PAIR UR2
PST (Pull 'N' Shrink Tubing) Pedestal Splice Closures and Reentry Kits give ultimate protection to splices. The kits provide protection from the harmful effects of moisture and ultraviolet light, as well as increased security from vandalism. The pedestal splice closure forms a reusable closure body around the copper network–without requiring special tools or flame for installation. The splice is enclosed in a polyethylene dome, and then an ethylene propylene tube (PST) is slipped over the enclosure joint and onto a sealing collar. Pulling a plastic rip cord on the PST allows it to shrink back to the minimum outside diameter necessary to form a tight seal. The flexible tubing material conforms to the shape of the joint, sealing out both air and water. The kit is available in five sizes from 3 inches to 8 inches in diameter to fit a full range of above ground pedestals
2.8 W x 2.5 D x 18 H INCHES APPROXIMATELY 100 PR MS2 OR 50 PAIR UR2
